Renovation Wrap Up

Our before and after kitchen renovation photos and my aunt is awesome:

With our trip hovering just around the corner (we plan to leave Oct. 15), we have been trying to wrap up projects around the house and with our clients. Tim is finishing up some contracts in Greeley, and I am completing some website content and blog posts for clients.

My aunt has graciously decided to help us while we are traveling by staying at our house and taking care of our dog Daphne while we are gone. This means the looming projects like the kitchen island needed to finally be completed, so she didn’t have to work around them like we have been. Plus, it’s nice to come home to a mostly finished home renovation.

A quick run through on the kitchen island: We had a very in-the-way pantry column in the center of the kitchen. We cut it in half with plans to make an island early on in the renovation, but lost steam before we completed it. We have been living with a cut-in-half-pantry for 6+ months, until recently when we fully completed the entire island.

in the way pantry

Way before: In-the-way pantry when bought the property.

Kitchen Island before

Way Before: The center column pantry right in the middle of the kitchen.

island before

Island before: with the drawer insert and Daphne dog

Island Before

The walls we used to make the island

Kitchen Island After

The completed kitchen island

Here are a few full kitchen before and after shots.

Kitchen Cabinets before

Kitchen before renovation

Kitchen after renovation

Kitchen after renovation

Kitchen before renovation

Kitchen before renovation

Kitchen after renovations

Kitchen after renovations

Kitchen after renovation

Our Kitchen with complete renovation. Notice we added some window trim and shelving.

 

Advertisements

Major Progress

We have come pretty far now. Tim and I are living in our home finally. We moved in the week his parents arrived for a visit at the end of January. Talk about cutting it close, but they were super helpful while they were here. We got everything livable and even had time to play a little.

I’m going to back up a bit, and walk you through some of the bigger projects we tackled in January. Tim had a guy’s snowboarding trip planned to Steamboat, so I took the opportunity of alone time at the house to start the cabinetry overhaul. I knew this would be a big job, but also would have a big impact on the way the space looked. Tim would be gone for a week, so my goal was to have all the cabinets (and some doors if I was lucky) sanded and primed before he got back. I will try to be specific for those of you who might be wanting to re-do cabinets one day.

Thanks to my local Benjamin Moore dealer Lucas Paint, I had a good idea of where to begin. The plan was to end up with a white, shaker-style cabinet, even though I started with faux wood laminate.

IMGP2471

What the kitchen looked like the day we bought it.

IMGP2570

Kitchen with pantry cut in half to make an island, the wall paper gone, and the popcorn ceiling scraped.

Mr. Lucas, from the paint store, told me to clean all the surfaces with dry dishwashing detergent powder before sanding. This is a strong degreaser, and I noticed it seemed to kind of change the laminate surface too… made it more penetrable to sanding, if that is possible. This was really hard on my hands, so I was sure to wear gloves, goggles and a mask. The process went like this: wipe down with water, scrub with detergent, wipe off detergent (if any was left during sanding, it would ruin the sandpaper), let dry, sand. I used an old palm sander and 120 grit paper, which I was very grateful for. Doing this by hand would have killed me.

DSC00169

The wall-mounted cabinets during the sanding process. You can see we have already textured and painted the walls.

DSC00179

Me sanding the doors. I had an assembly line where I would scrub them down, wash them off, sand them and clean them again. All before priming.

After all the sanding was cleaning. I had to repeatedly wipe down the surfaces for the cabinets to make sure all the fine laminate dust was gone. This seemed to take forever and I even took the Shop Vac to the doors after sanding. I also ended up using a lightly dampened cloth with a water and vinegar spray. It seemed to do the trick and dry quickly. Then I could move on to primer. I used BIN primer. It is alcohol based, so it has a really strong smell, but it dries quickly and sticks to anything.

Bottom cabinets done and drying.

Bottom cabinets primed and drying.

DSC00187

All cabinets are primed, but the doors took a while because I had to lay them flat to dry on each side.

I had reached my goal when Tim and his friend Drew got back from their trip. Drew had offered to stay a few extra days and help! He replaced every outlet and light switch in the entire house making it look instantly more updated.

DSC00190

Drew and Tim cutting wood to reface the cabinet in a shaker style.

DSC00191

We had to make the wood strips 3.75″ wide to hide all of the outdated design that was on the cabinet face.

DSC00196

I used wood glue to adhere the strips to the door faces.

I used Benjamin Moore Advance in semi-gloss finish and White Heron color. It’s a slightly off white that really lends itself to gray, looking nice with the wall color. The Advance paint was again recommended by Lucas Paint in Denver. It is a Latex paint that behaves a lot like an oil-based, leaving no paint strokes and wears well over time. I realized along the way that using a small foam roller left some bubbles in the paint, so I would roll the paint on and run over it with a high quality 2″ angle brush. This technique worked well and left a smooth finish.

DSC00200

Tim and Drew are hanging a kitchen fixture. You can see the first coat of paint on the cabinets.

DSC00203

I’m rolling the paint onto the new cabinet faces.

DSC00205

Tim installing the refinished cabinet doors.

DSC00213

Kitchen after two coats of paint. We decided to add the trim to the face of the drawers as well.

The next big project we had to complete before Tim’s parents arrived was the flooring. We chose a laminate that looks like a dark hand-scraped hickory by Evoke. Tim was confident in his flooring installation skills, but had no experience leveling floors. We had a very  unlevel particle board sub-floor on top of a layer of plywood, which made it tough. We got several different opinions on how to level the floor, but were still unsure which route would be the best. Finally, Tim decided which one he felt more comfortable with — a self-leveling concrete-based product that you prime, pour, and spread.

DSC00220

Tim working on leveling the floor. We had the biggest dip in the floor near the back door.

DSC00223

All the gray areas are low spots in the floor.

DSC00230

Once the floor was level and dry, we laid down a moisture barrier.

DSC00233

Yeah, flooring, finally! We had to maintain the correct spacing from the walls and make sure the seams were staggered. I laid out the pieces and Tim installed them.

DSC00238

The last few pieces of flooring going in with our neighbor Travis helping.

The morning that Tim’s parents arrived, we had new countertops installed. We got an amazing deal after hunting around the city. We picked a Kashmir White granite because of the look and the price. We still have to put on the finishing touches, but we are getting there!

DSC00241

We moved in some of our furniture and Debbie helped me arrange and rearrange. We had to clean the floor over and over from all the construction dust.

DSC00244

My white kitchen. We have to trim it out, add the cabinet pulls and work on the island, but it is a vast improvement. It’s finally functioning, most importantly.

DSC00245